Apus PXP - 15H
The PXP-15HF generator is newly designed with evolutionary engineering,
state-of-the-art microprocessor control, and PROM memory for preset APR programmable techniques. Using a constant potential X-Ray energy (15mA / 80kV) and micro focal x-ray tube, the APUS system produces the highest quality image and image resolution for all podiatry radiography.
The Mid-base table integrated with tube-stand is easy to use and flexible for positioning all podiatry anatomy examinations.
|
|
|
MinXray HFPS System
The versatile HFPS can be installed with the X-Ray unit on either the left or right side of the orthoposer base to best fit the space available in the podiatry office. DP, AP, and oblique views are taken with the patient standing on the floor to enhance safety. Lateral views of the foot, all ankle views, and other specialty views are taken with the patient standing on the orthoposer base. Three safety railings on the orthoposer ensure patent safety and security. The easy-to-use MinXray HFPS has a clean, contemporary design requiring minimal floor space.
|
|
|
MinXray HFPM System
MinXray model HFPM is a mobile X-Ray system that is easily moved and operated for unmatched imaging versatility. The system rolls smoothly from room to room. The base is counterweighted and stable, eliminating the need for long legs that get in the way and take up space. Vertical travel of the tube head allows for simple positioning for weight-bearing radiography on the floor or an orthoposer, or for taking non-weight bearing views over a wheelchair, exam chair, or operating table.
|
|
|
JPI Podiatry X-Ray System
Combining the powerful and economical AJEX 9015 HF portable X-Ray generator and a custom stand, the JPI Podiatry System is high quality, low cost option for the podiatric clinic. The JPI Podiatry System is built with a vertical swivel arm generator mount capable of a full 90 degrees of movement and available in a motorized or manual configuration. The user friendly 9015HF X-Ray generator allows quick and convenient patient imaging. The JPI runs on 120V power, weighs only 140 lbs and requires very little assembly.
|
|
|
X-Cel Orthoposer
This unit features solid state control with adjustable kVp selection, stabilized mA voltage, 10 or 15 mA switch selection, audible emission buzzer, mA meter for visual indication of emission. It has adjustments to compensate for tube filament aging, an exposure button on coiled cord, a digital electronic timer from 6/60 to 4 seconds, and remote mounting with 15 ft. cable. The 1.0 mm X-Ray tube focal spot gives sharp radiographic results and long life.
|
|
|
Mobile P-700M A/C
With 28 inch SID, large casters for easy roll, and short wheelbase you can easily position to X-Ray from a chair. The factory setting is for 8” poser; other X-Ray head mounting heights are available.
|
|
|
